Description
Package Content:
Wind Turbine x 1
Blades x 5
Controller x 1
Nose Cone x 1
Set Screws and Nuts x 1
Installation Notes x 1
Anemometer x 1（no battery）
Note:Without tower tube
(We recommend：steel pipes or iron pipes, diameter :50±2mm)
- 1. For Home Use
- 2. For Monitoring Use
- 3. For Boat / Marine Use
- 4. For Wind Solar
- Hybrid Streetlight Use And More
Specifications:
Rated power:400 W
Maximum power:410 W
Number of blades:5
Rated voltage:12 V
Start-up wind speed:2.5 m/s
Rated wind speed :13 m/s
Working speed:3-25 m/s
Survival wind speed:40 m/s
- Blade Material: Nylon Fiber
- Generator Type: 3-Phase AC Permanent Magnet Generator
- Braking Method: Electromagnetic
- Wind Direction Adjustment: Automatically Adjust The Windward Angle
- Operating Temperature: -40 ~ 80 ℃
- Magnetic Material: Neodymium Iron Boron
- Cabin Material: Die Casting Aluminum Alloy
|
|
|
|
|---|---|---|
High efficiency1. Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. 2. An intelligent wind charge controller can shut down auto when the battery is fully charged. Which can adjust current and voltage effectively. 3. The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine’s breeze starting ability. |
High quality1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape. 2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable. 3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance. |
Easy installation1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key. 2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm. 3.Connect the wind turbine’s cable to the controller and the battery must be connected to the controller before wiring. |
Feature:
1. Wind Turbine starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.
2. Wind generator Blade adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. With optimized aerodynamic shape and structural design, has a High wind energy utilization.
3. Our wind turbine adopting patented permanent magnet rotor alternator, with a special kind of stator design, decrease resistance torque of the generators efficiently.
4. Being installed by human design and easy for installation, maintenance and repair.
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
| 400W-12V | 400W-24V | 400W-12V | 1000W-24V | 200W-12V | |
| Rated Power | 400W | 400W | 400W | 1000W | 200W |
| Max Power | 410W | 410W | 410W | 1050W | 220W |
| Rated Voltage | 12V | 24V | 12V | 24V | 12V |
| Start Wind Speed | 2.5 m/s | 2.5 m/s | 2.5 m/s | 2.5 m/s | 1.5 m/s |
| Rated Wind Speed | 13 m/s | 12 m/s | 12 m/s | 12.5m/s | 11 m/s |
| Number of Blades | 3 | 3 | 3 | 3 | 5 |
| Material of Blades | Nylon Fiber | Nylon Fiber | Nylon Fiber | Nylon Fiber | Nylon Fiber |
| Wind Wheel Diameter | 49inch | 51inch | 51inch | 83inch | 31.2 inch |
| Hoop fixed | ✓ | ✓ | |||
| French plate fixed | ✓ | ✓ | ✓ |
Reviews
There are no reviews yet.